Coverage Rate Chart

Whittle Waxes Product Range


Coverage depending on preparation, application and timber species.


Container sizes:


Hardwax Oil

Matte and

Classic sheen


Up to 40 M2.


0.750ml, 2.5L, 10L, 30L


Natural, durable, water resistant finish for all interior timbers, such as floors, bench-tops and doors as well as stone, marble, engineered and cork floors.

Efficient in damp rooms such as the bathroom and kitchen. Well suited for children’s nurseries, hospitals etc.

Object Oil

Approximately 100 ml/m2 for maintenance, less for raw timber.

1 or 2

750ml 2.5L, 10L

A versatile product that can be used as a finish, as well as maintenance of existing interior waxed surfaces. Also ideal for OBS boards and exotic Timber.

1 Coat 100

Between 25 - 40 m² / l (25 - 40 ml / m)


750ml, 2.5L

100%solvent-free, natural oil-based Timber coating.

Single Coat system, Fast drying 6-8 h depending on temperature and airflow. Resistant to common foods and household chemicals, CO2 neutral.


Teak Oil

1 litre for approx. 15 m2 per coat.


0.5L, 2.5L, 10L

Whittle Waxes Teak Oil is a natural wood preservative made of resilient, micro fine, weather-resistant, water-soluble resins. Contains pigments, which effectively block UV rays and protect wood from damage.


1 litre for approx. 15 – 20 m2 per coat.


0.5L, 2.5L, 10L.

 Classic paste wax for the coating and maintenance of timber floors and furniture, leaves a reparable antistatic and dirt repellent surface.

Floor Care

Add 25-30 ml Floor Care to 6-8 litres of fresh water



Mopping Additive designed to both clean and maintain floors finished with Hardwax Oil.


Preparation Cleaner

Dilute 50 ml of Preparation Cleaner in 5 liters’ of water.


1L and 5L

An aggressive cleaner for dirty or worn surfaces in commercial situations. Removes contaminates such as dirt, grease and fat leaving the surface ready for refinishing or refreshing.






Traditional Hardwax Oil

Matte, Luster, Satin, and Gloss.

1st coat 15-20m2/L and with the 2nd coat ~25m2/L.


500ml, 1L, 2.5L, 5L,

Durable clear finish, easily maintained, water repellant and dirt resistant, safe for use on children’s' toys contains no pollutants and minimal solvents Microporous- Allows timber to breathe and move seasonally.


1st coat 30-40m2/L, then 2nd coat 40-50m2/L



 Treatment for interior wooden flooring, one coat system, infinitely repairable. Natural oiled look.99% solid, virtually solvent free, allows the timber to breathe very high coverage rate.



1 litre for approx. 20 m2 per coat.


500ml, 1L, 2L

Natural pigment stains to enhance the grain & strengthen the colours. All Treatex Colour Tones can be mixed. No overlapping, applicator marks. Once dry, seal with two coats of Treatex Hardwax Oil.

Please check our website for other available product information.